Frequently Asked Questions
Setting up a Bootable RAID
For Mac Users:
1. You must have an existing installation of the Mac operating system installed.
2. Set up the RS6314A normally by
See setting up the hardware
How to install the WebGUI
How to create an array
3. Once an array is created, the logical volume can be seen by your operating system
4. Use a 3
party disk cloning tool to copy your bootable drive onto the logical drive you
rd
just created.
For Windows Users:
Booting from Windows is currently not supported on RS6314A.
Recovering your Password
For Mac Users:
1. Open Terminal
2. Type or navigate to cd /usr/share/hpt
3. Type rm hptuser.dat, to remove the file
4. Reboot
For Windows Users:
1. Open file explorer
2. Navigate to C:/Windows/
3. Delete hptuser.dat
4. Reboot
36