Table of Contents
Advertisement
Table 8 – POC Actions (Continued)
PB cover position
PB glue amount
Separation enhancer
Media registration adjustment
Drum clean procedure
Cleaning z-sensor
Clean the scanner sensor
16 Value is based on LTR sized paper. Estimated average values in the field, based on data from
supplier. Data is subject to change depending upon many factors including, without limitation,
monthly copy volume, environment, type of image printed and customer handling of the equipment.
G. Operator Replaceable Parts
Operator Replaceable Parts (the separation feed rollers, heat exchange foil,
and spiral cleaner) are service parts selected specifically for the Operator to
replace. The Operator Replaceable Parts may be stored at the customer site
for quick access and replenished regularly by the servicing dealer based on
the monthly print/copy volumes of the VarioPrint 135/120/110.
Canon USA parts recommendations:
Operator Replaceable Parts stored at the customer location should be
placed in a locked cabinet that only the service technician and the
operator have access to.
All Operator Replaceable Parts that have been replaced should be
retrieved by the servicing dealer to verify that the part was in fact ready to
be replaced and to properly dispose of the parts.
The VarioPrint DP LINE POC Kit-A1 (available for purchase) includes an
initial supply of operator replaceable parts and tools required for the operator
to use during part replacement. The tools include gloves (required when
replacing the spiral cleaner) and a socket wrench.
Océ VarioPrint 135/120/110 Service Guide
Revision 3
POC item
Océ VarioPrint 135/120/110 Service Guide
Estimated Life
16
(copies/prints
)
As Necessary
Remarks
January 2013
Page 20
Advertisement
Table of Contents
