When Recording From Other Equipment, The Inputlevel Is Too Strong Or Not Strong Enough - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Troubleshooting
IC recorder operations
Software operations (Sound
Organizer)
Messages
System limitations
List of Topics
4-447-269-14(1)
© 2013 Sony Corporation
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
When recording from other equipment, the input
level is too strong or not strong enough.
Connect the headphone jack of other equipment to the
the IC recorder and adjust the volume level on the piece of equipment
connected to the IC recorder.
If you use an audio connecting cable with high resistance, the input level
becomes low during recording. Use an audio connecting cable without
resistance.
The sensitivity setting is set to "
High," " Medium," or "
When the sensitivity setting is set to "Manual," adjust the recording level
manually.
Related Topic
Switching the directionality of the built-in microphones
Recording sound manually
Selecting the input mode and the input sensitivity of an external device (Ext.
Input Setting)
Search
Low" or " Low(Music)." Set it to "
High(Music)."
Print
(microphone) jack of
Go to Page Top
Go to Page Top
Notes on use
272