Help Guide | Dividing A File At The Current Position - Sony ICD-SX733 Help Manual

Help Guide
How to Use
Preparation
Recording
Playback
Editing
Menu
Computer
Software
Specifications
Announcements
Troubleshooting
List of Topics
IC Recorder
ICD-SX733/SX734/SX1000
Back Back to Top
Dividing a file at the current position
You can divide a file in the stop mode, so that the file is divided into two parts and
new file numbers are added to the divided file names. By dividing a file, you can
easily find the point from which you want to play back when you make a long
recording such as at a meeting. You can divide a file until the total number of files
in the folder reaches the maximum number allowed.
1. Stop the file at the position where you want to divide a file.
2. Select MENU - the tab - "Divide Current Position," and then press
A period of approximately 4 seconds from the dividing point will be played back
repeatedly.
3. Press or to adjust the position to be divided, if you wish.
You can adjust the position to be divided by approximately 0.3 seconds in a
period of approximately 6 seconds each, both before and after the current
position.
4. Press .
"Divide?" appears on the display.
5. Press or to select "Execute," and then press
The "Dividing..." animation appears, and the divided files will be suffixed with a
sequential number ("_1" for the original file, and "_2" for the new file).
A. Before dividing a file:
B. After dividing a file: A suffix made up of a sequential number is added to a
file name of the divided files.
6. Press STOP to exit the menu mode.
Note
You cannot divide a protected file. To divide the file, release the protection first.
Search
is the position you want to divide.
Print
.
.
188