Cisco Unified Access CT5760 Deployment Manual page 24

Web gui

Table of Contents

Configuration Examples

Click SPG1 and verify that your MA address, and control and data link status is Down. That is normal

Step 32

for now since you will be configuring the 3850 (MA) in the upcoming steps.

Configuring Mobility between Mobility Agent (3850) and Mobility Controller

(5760) Example

Follow the same steps outlined in the

Step 33

configure the 3850 switch. In this example, we will start with the Initial Wizard Configuration. Please

note that there are differences between the 3850 and the 5760 Initial Wizard configuration.

Open a browser and type your 3850 IP address. For example:

https://10.10.10.2

Enter username: admin

Password: Cisco123

Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2

Basic Configuration for the CT5760/3850 Example

to access and

Table of Contents

Catalyst 3850