Cisco Unified Access CT5760 Deployment Manual page 10

Configuration Examples
Creating a WLAN—You can create a WLAN in this screen. It is disabled by default. Create an 802.1x
Step 10
WLAN name. In this example, it is NGWC1-1x.
Enabling 802.11 Radios—Radios were disabled once the country code was changed in earlier steps.
Step 11
Enable the radio by checking th 802.11a/n and 802.11 b/g/n check boxes.
Step 12 Time Settings—You can choose between two modes: Manual and NTP. In the following example, choose
NTP and use 10.10.10.1 as the NTP Server IP Address.
Save and apply the Wizard
Step 13
Cisco Unified Access CT5760 Controllers and Catalyst 3850 Switches Web GUI Deployment Guide, Cisco IOS XE Software Release 3.2.2
10