Operation; Punch-Through - Radio Shack 7-in-1 Remote Control with Lighted Keypad Owner's Manual

15-1924.fm Page 11 Monday, July 19, 1999 12:50 PM

OPERATION

1. Press the device key for the device you want
to control, then point the 7-in-1 at the device
and press
POWER (All Lts On)
for some cable converters) to turn the
+ (On)
device on.
2. Repeat Step 1 for all other devices you want
to operate.
3. Point the 7-in-1 toward the device you want
to control, then press the appropriate device
key and the desired command keys.
Note: The command keys on the 7-in-1 work
the same as the keys on the original remote
control; however, the labeling might differ
slightly.
4. To turn off the last device you selected, press
POWER (All Lts On)
press the device key for the device you want
to turn off, then press

PUNCH-THROUGH

The punch-through feature lets you alternately
control two different devices without pressing the
device keys for each one. Here's how it works.
Not all of the 7-in-1 Remote Control's keys are
used by every device. For example, a TV is often
the only device that uses the volume keys. After
you press , then press
TV
the volume control to control the TV.
Punch-through does not work when you are using
the 7-in-1 to control CD players and Plug 'n Power
devices.
Notes:
• The punch-through feature might not work if
the last two devices you selected have the
same (or similar) features. For example,
most TVs and some cable converters have
channel select keys on their remote controls.
Need help? Call 1-800-989-4706
(or
CHANNEL
. To turn off other devices,
.
POWER (All Lts On)
, you can still use
VCR
11