Using Punch-Through; Turning Punch-Through Off - Radio Shack Audio/ Video Remote Control Owner's Manual

15-1994.fm Page 11 Tuesday, February 29, 2000 2:04 PM
2. Press . The red light blinks twice.
992
3. Press .
TV
4. Press . The red light blinks twice.
AUX1
5. Program the converted device key (
the code for the second TV. (See "Setting Up
Your Remote Control" on Page 7.)
Repeat these steps for each key you want to convert.
To convert a key back to its original function, repeat
Steps 1–2, then press

USING PUNCH-THROUGH

Punch-Through lets you alternately control two differ-
ent devices without pressing the device keys for
each one.
For example, a TV is often the only device that uses
the volume keys. With the 6-in-One programmed to
punch-through to the TV, you can control the TV's
volume while the 6-in-One is in any device mode.
1. Hold down until the red light blinks twice.
P
2. Press 9 9 3 .
3. Press . When you press
TV
device key) and use your volume keys, the 6-in-
One controls the volume through the TV instead
of the VCR (or the other device).

Turning Punch-Through Off

1. Hold down P until the red light blinks twice.
2. Press .
9 9 3
Need help? Call 1-888-284-8735
AUX1
twice.
AUX1
(or another
VCR
) with
11