Other Checks - Honda BF75A Owner's Manual

Other Checks

(1)
Check the following items:
(1) The fuel hose for kinking,
collapsing or a loose connection.
(2) The tiller handle for loose, play or
smooth operation.
The control lever for smooth
operation.
(3) The switch for correct operation.
(4) The stern bracket for damage.
(5) The tool kit for missing spare parts
and tools.
The anode metal for damage,
(6)
looseness or excessive corrosion.
(2)
(2)
(3)
(3)
(4)
(6)
The anode metal (sacrificed metal)
helps to protect the outboard motor
from corrosion damage; it must be
exposed directly to the water
whenever the motor is in use.
Replace the anode metal when it has
been reduced to approximately one
half of its original size.
PRE-OPERATION CHECKS
(5) TOOL KIT
14 × 17 mm WRENCH
10 × 12 mm WRENCH
8 mm WRENCH
FLAT SCREWDRIVER
OWNER'S MANUAL
PHILIPS
SCREWDRIVER
OIL CHECK SCREWDRIVER
The possibility of corrosion
damage is increased if the anode
metal is painted over or allowed to
deteriorate.
Parts/materials which should be
installed on board:
(1) Owner's Manual
Tool kit
(2)
(3) Spare parts: spark plugs, engine oil,
spare propeller, plain washer,
castle nut, and cotter pin.
(4) Other parts/materials required by
laws/regulations.
STARTER ROPE
PLIERS
SCREWDRIVER
HANDLE
TOOL BAG
SPARK PLUG WRENCH
53