Before Use; Finding The Camera In The Network - Kompernass 48807 Quick Installation Manual

Before use

Around 30 seconds after the power supply is switched on, the camera carries out a self-test and
completes a movement covering its entire horizontal and vertical panning range. Afterwards, the
device is ready for use. If the device has recognised a wired network connection, the yellow control
LED fl ashes rapidly.
NOTE
► For the fi rst confi guration, the camera must be connected via the LAN connection.

Finding the camera in the network

Insert the supplied CD in the disk drive of the Windows
your camera. Open the drive in Explorer and double-click on the fi le "Search Tool". This will start the
program to search for your camera in the network (no fi les are installed on your computer).
1) Depending on your computer confi guration, a fi rewall warning will appear.
Click on "Allow access".
IUK 5 A1
computer via which you want to operate
®
GB
13