Search Skip Memory - Radio Shack 20-501 User Manual

If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated. If
you entered the frequency by mistake, press . /CLR.
To enter the frequency anyway, press E to accept.
The scanner moves to program mode after you
stored the frequency.

search skip memory

You can skip up to 50 specified frequencies during a
search. This lets you avoid unwanted frequencies or
those already stored in a channel.
Notes:
• You cannot skip frequencies during WX service
search.
• Search skip frequencies are shared by service
search, direct entry search, chain search, and
signal stalker modes. If skip frequencies are sent
in certain modes, the frequencies are also
skipped in other search modes and signal
stalker mode.
To skip a frequency, press FUNC and L/O when the
scanner stops on the frequency during a search or a
search hold. The scanner stores the frequency in
memory and automatically resumes the search if it
is not in hold.
45 Beyond the Basics