Table of Contents
Advertisement
16-420.fm Page 34 Tuesday, July 20, 1999 11:32 AM
3. Repeatedly press
CHANNEL
to set the start hour. Then press
NEL
. The start minute flashes.
VOLUME
Note: If you set an earlier start hour than
the current hour, the Model 28 automati-
cally changes the today timer's date to the
next day.
4. Repeatedly press
CHANNEL
to set the start minute. Then press
NEL
.
AM
or
PM
VOLUME
5. Repeatedly press
CHANNEL
or
. Then press
PM
VOLUME
moves to the
END TIME
6. Repeat Steps 3-5 to set the end hour and
minute. The current channel number flashes.
7. Repeatedly press
CHANNEL
to select the channel number.
NEL
Then press
VOLUME
speed flashes.
8. Repeatedly press
CHANNEL
to select the tape speed (
NEL
SLP
).
9. Press
, then double-check all
VOLUME
the set information.
• If it is correct, press
• If an entry is not correct, repeatedly
press
to move to the incor-
VOLUME
rect entry, use the buttons on the front of
the Model 28 to enter the correct infor-
mation, then press
MONITOR
10. Press
to turn off the Model 28. The
POWER
TIMER REC indicator turns on to indicate
that the Model 28 is in the timer standby
mode.
Important:
• You can turn on and operate the Model 28
manually prior to the set start time, but the
Model 28 makes a today timer recording
only if the power is off at the set start time.
• Be sure the TIMER REC indicator turns on
when you turn off the Model 28. If it does
not, check your programming.
34
or
CHAN-
Checking/Changing the Today Timer
or
CHAN-
1. Press
flashes.
2. Press
to set
AM
. The cursor
line.
or
CHAN-
. The current tape
3. Double-check all the set information.
or
CHAN-
SP
,
LP
, or
.
MONITOR
4. Press
.
Clearing the Today Timer
1. Press
2. Press
3. Press
4. Press
• If you set up the Model 28 to record a CATV
program through a cable box, be sure to
leave the cable box turned on and tuned to
the correct channel before the timer pro-
gram starts.
to turn on the Model 28.
POWER
. The today timer program
MONITOR
screen appears on the TV screen.
- TODAY TIMER -
DATE
02/15 THU
START TIME
10:28 AM
END
TIME
11:28 AM
CHANNEL
07
TAPE SPEED
SP
• If it is correct, press
MONITOR
• If an entry is not correct, repeatedly
press
to move to the incor-
VOLUME
rect entry, repeatedly press
and
CHANNEL
information, then press
to turn off the Model 28. The
POWER
TIMER REC indicator turns on.
to turn on the Model 28.
POWER
to display the today timer
MONITOR
program screen.
If the timer recording is already in progress,
press
then
MONITOR
STOP/EJECT
. The Model 28 clears
VOLUME
the set today timer program.
to exit the screen.
MONITOR
.
CHANNEL
to enter the correct
.
MONITOR
.
Advertisement
Table of Contents
