Table of Contents
Advertisement
16-420.fm Page 33 Tuesday, July 20, 1999 11:32 AM
Notes:
• If you press
ADD/DELETE
the program number (the program num-
ber flashes), the Model 28 clears the
timer program screen and deletes any
settings you entered.
• After you make a tape speed selection,
pressing
SELECT
gram screen to disappear and stores any
settings you entered.
6. Press
to turn off the Model 28. The
POWER
TIMER REC indicator turns on.
Clearing an Automatic Timer
1. Press
to turn on the Model 28.
POWER
2. Press
The main menu appears on
MENU.
the TV screen.
3. Press
on the remote control to select
1
TIMER
PROGRAMMING
gram screen appears on the TV screen.
Note: If the timer recording is already in
progress, press
MONITOR
control then press
Model 28.
4. Use the number buttons (1-7) on the
remote control to select the desired pro-
gram number.
PROGRAM NUMBER 1
DATE
START TIME
END
TIME
CHANNEL
TAPE SPEED
5. Press
ADD/DELETE
to clear the program timer.
6. To clear another program timer, select the
timer number then press
again to clear it.
7. Press
to exit the screen.
MENU
after selecting
causes the timer pro-
. The timer pro-
on the remote
on the
STOP/EJECT
02/15 THU
10:28 AM
11:28 AM
07
SP
on the remote control
ADD/DELETE
TODAY TIMER RECORDING
(TIMER NUMBER 8)
The Model 28's today timer (stored in program
timer number 8) lets you quickly program the
Model 28 to start and stop recording within the
next 24 hours.
Note: You cannot set a today timer while you
are recording a program.
Setting the Today Timer
You must use the buttons on the front of the
Model 28 to set the today timer. You cannot use
the remote control.
Note: Before you start, be sure you set the Mod-
el 28's clock to the correct date and time (see
"Setting the Clock" on Page 19). If you have not
yet set the clock, the Model 28 automatically en-
ters the clock setting mode before it displays the
today timer program screen.
1. Insert a blank cassette, or one you want to
record over, into the cassette compartment.
The Model 28 automatically turns on.
2. Press
. The today timer program
MONITOR
screen appears on the TV screen.
- TODAY TIMER -
DATE
02/15 THU
START TIME
10:28 AM
END
TIME
CHANNEL
TAPE SPEED
This screen displays the same information
as you see on the automatic timer program
screen (except the program number). The
current date appears on the
the current time appears on the
line. The current start time hour
TIME
flashes.
- - : - - - -
07
SP
DATE
line and
START
33
Advertisement
Table of Contents
