Table of Contents
Advertisement
16-420.fm Page 24 Tuesday, July 20, 1999 11:32 AM
SPECIAL FUNCTIONS
The following information describes some of
your Model 28's special on-screen, display, and
search functions.
THINGS YOU SEE
On-Screen Displays
To view your Model 28's current operating mode
and other information about your Model 28, re-
peatedly press
during playback or while
SELECT
watching TV. Each time you press
see this information on the TV screen in the fol-
lowing order.
• Function indicator / tape speed / tape
counter
STOP
SP
COUNT 0:12:34
• Function indicator / tape speed / time /
channel
STOP
SP
• No display
Note: The function indicator and tape speed dis-
plays only stay on the TV screen for a few sec-
onds, but the tape counter or time and channel
indicators remain on until you select another
function.
24
Function Indicators
When you press a function button (such as
), the selected function's indicator appears
STOP
on the TV screen.
, you
SELECT
When you change the channel, the new channel
number appears on the TV screen for about 5
seconds.
Note: If you play back a poor quality (worn) or
damaged tape, the function indicator might not
appear on the TV screen.
USING THE SLEEP TIMER
The Model 28's sleep timer lets you set the Mod-
el 28 so it plays for a specific amount of time
then automatically turns off.
Follow these steps to set the sleep timer.
5:40 PM
05
1. Press
SLEEP 0 MINUTE
screen.
2. Within 5 seconds, repeatedly press
until the TV screen shows the desired sleep
time period. You can set the time in 30-
minute increments, up to 120 minutes.
Note: If you do not press
seconds,
period disappear. Press
redisplay the time.
To cancel the sleep timer, repeatedly press
SLEEP
TV screen.
STOP
on the remote control.
SLEEP
appears on the TV
SLEEP
SLEEP
and the displayed time
SLEEP
until
SLEEP 0 MINUTE
appears on the
SLEEP
within 5
once to
Advertisement
Table of Contents
