Turning The Power On And Off; Turning The Power On - Canon imageFORMULA ScanFront 400 Set Up And Operation Manual

2.

Turning the Power ON and OFF

Use the power button to turn the scanner ON, and press the [Power off] button on the touch panel to turn it OFF.
❏ Turning the Power ON
Press the power button to turn the scanner ON. The power
button lights, and the Home screen or the login screen
appears.
Home screen
Hint
• Wait a moment for the Home screen to appear after pressing
the power button to turn the scanner ON.
• If users have been registered, the login screen appears. (See
"Login Screen" on p. 55.)
• When the power indicator is lit but nothing appears on the
touch panel, Display Off has activated to turn the panel display
off. You can touch the touch panel to restore the display.
(Refer to "Adjust the wait time until the display automatically
turns off." on p. 152 of the ScanFront 400 INSTRUCTIONS.)
• When the power indicator is flashing but nothing appears on
the touch panel, the Low Power mode has activated to
temporarily stop scanner operations. To switch out of Low
Power mode, press the power button. (Refer to "Adjust the
wait time until the Low Power Mode." on p. 152 of the
ScanFront 400 INSTRUCTIONS.)
• The touch panel display may appear dark at times. In such
cases, touching the panel will restore it to its normal
brightness.
Power button
Chapter 4 Operating Procedures
53