Scanning From The Job Button Screen; Address Selection Screen - Canon imageFORMULA ScanFront 400 Set Up And Operation Manual

If you select an address and then press [Next], the Scan /
Send Settings screen appears. Set the scanning conditions
and then start scanning.
❏ Scanning From the Job Button Screen
If you press a job button, the Scan / Send Settings screen
appears. Confirm the address and scanning settings
registered to the job button and then start scanning.
For details on the scanning procedure, read from the
setting of scanning conditions in Step 5.
IMPORTANT
• The settings screen display and the screen displayed after
scanning differ depending on the job button settings. For
details on the overall flow from configuring settings to sending
an image file, see "Flow of Scanner Operations" on p. 52.
• Job buttons cannot be used to save image files to USB
memory or send them to printers for printing.
62
Chapter 4 Operating Procedures
❏ Address Selection Screen
From the address selection screen, you can select the
address to send an image file and register addresses.
a
c
d
a Address Book type
Selects the address book type (Shared Address Book or
My Address Book). If the address book server setting is
enabled, [LDAP Address Book] is added.
b Address type
If you select the type of address (e-mail, shared folder,
fax, FTP, and groups) to display in the address list,
addresses of the selected type are displayed.
c Address List
Displays registered addresses and enables you to select
the address to send an image file.
Hint
• The following icons are used to indicate the types of address.
: E-mail : Shared folder
: FTP : Group
b
h
e
f
g
: Fax