The Standard Finisher is an output device that can perform up to 100-sheets stapling, up to 3,000 sheets stacking, punch, saddle stapling/center-fold, optional
C/Z-fold/three-fold, and cover paper insertion.
The Standard Finisher has a built-in interposer (Tray T1 or 8 depending on your product) that feeds cover paper to the finisher for stapled sets. Other than the
Top Tray, the Standard Finisher does not support the full paper weight range that can be printed on the press. Refer to Standard Finisher Specifications for
details on the media that is supported.
Standard Finisher Specifications
Top Tray
Standard Finisher Top Tray Capacity by weight and paper finish
Paper type and weight
Uncoated
52-80 gsm
80-350 gsm
Coated
106-350 gsm
*Cannot be offset
Stacker Tray
Standard Finisher Stacker Tray Capacity by weight and paper finish
Paper type and weight
Uncoated
52-80 gsm
80-300 gsm
Coated
106-300 gsm
*Cannot be offset
301-350 gsm media cannot be sent to the Stacker Tray (accepted in Top Tray only)
Stapling
Standard Finisher Staple Capacity by weight and paper finish