Fender RUMBLE STAGE 800 Owner's Manual page 9

From the list of presets shown. Use the ENCODER to scroll to and select the preset to be moved. When a pre-
set is selected to be moved, the box containing its name changes from blue to amber (see illustration below).
Turn the ENCODER to move the amber-highlighted preset to a different position in the preset list; then press
the ENCODER to assign the preset to that new position. The amber box containing the preset name will then
change back to blue (see illustration below).
Note that when moving a preset to a new position, it assumes the correct sequential numerical value for that
position; accordingly, all other presets are then "shifted" into correct sequential numbering.
Rumble Studio 40/Stage 800 presets cannot be deleted. They can, however, be "cleared"—meaning that the
preset remains in place but is "emptied" of its original contents (control settings, amp model, effects). If it is
part of a Setlist, the cleared preset will remain in the Setlist.
Note that when a preset is cleared, its original sequential number will remain in place, and it will by default
contain only the "Studio Preamp" amp model (and its controls).
To clear a preset, first press the MENU utility button and use the ENCODER to scroll to and select "PRESET
ORGANIZER" (see illustration below).
back
6 - KGB-800
7 - ROCKIN' PEG
8 - BASSMAN 300>
9 - '59 BASSMAN>
10 - '70S BRIT>
back
8 - '59 BASSMAN>
9 - '70S BRIT>
10 - BASSMAN 300>
11 - BASSMAN TV
12 - BRITISH CO>
CLEARING A PRESET
WIFI
BLUETOOTH
PRESET ORGANIZER
SETLIST
CLOUD PRESETS
7
MENU
MENU
MENU