Editing Effects Settings - Fender RUMBLE STAGE 800 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Select "DELETE" in the effects placement options menu by scrolling to it and pressing the ENCODER.

The SIGNAL PATH LAYER will then show the effect has been deleted (as indicated by white arrow), either by replacing

it with a plus-sign placeholder symbol (as seen here) or by shifting another effect (if present) into its position.

To edit the control settings of a particular effect, turn the ENCODER to highlight the effect in the SIGNAL

PATH LAYER, then press the CONTROLS LAYER button, which presents the individual controls for each effect.

Turn the ENCODER to scroll through available effect controls, which will each turn blue as they're highlight-

ed, and press the ENCODER to select a specific effect control, which will then turn red.

After selecting a specific effect control, turn the ENCODER to edit that specific effect control to preference,

and press the ENCODER again to keep the edited effect control setting. The edited effect control will then

turn from red back to blue. When an effect control is edited, the box containing the preset number will

change from blue to red (indicating that a preset edit has been made), and the SAVE utility button will illumi-

nate. With the effect now edited, further effects control edits can then be made or the SAVE utility button can

be pressed to keep completed preset edits (see illustrations below and on next page).

To edit the settings of a particular effect, highlight the effect in the SIGNAL PATH layer

BYPASS

REPLACE

MOVE

ADD FX

DELETE

BASIC OCTOBOT

AMPLIFIER

RUMBLE

OCTO

BOT