Editing And Saving Presets - Fender RUMBLE STAGE 800 Owner's Manual

Within each preset, the amplifier control knob settings, amp models, and effects types and parameters can
be tailored to individual preference. When a preset is selected, the box containing its number is blue, indicat-
ing that no edits have been made to it (see illustration below).
When edits to a preset have been made, the box containing the preset number changes to red, and the SAVE
utility button illuminates (see illustration below). If an edited setting is not saved, the preset will revert to its pre-
vious settings when returning to the preset after leaving it, or when turning the amplifier off and back on again.
Once a preset is edited, there are three options for saving it. These options are accessed by pressing the SAVE
utility button and using the ENCODER to scroll to and select one of the three options, described below.
SAVE: For saving the edited preset using the same name and in its original position (see illustration below).
SAVE AS: For moving the edited preset to a different position and saving it with or without a different name.
The preset can be moved to a numbered empty slot, or it can replace (overwrite) an existing preset occupy-
ing another numbered slot.

EDITING AND SAVING PRESETS

BASIC BASSMAN CLN
SUPER
SMALL
BMAN-OD ROOM
1000
FREQ
BASIC BASSMAN CLN
SUPER
SMALL
BMAN-OD ROOM
1000
FREQ
SAVING EDITED PRESETS
SAVE
SAVE AS
RENAME
SAVE
10
SAVE