Network Connection - Raymarine Quantum 2 Installation Instructions Manual

4.4 Network connection

The scanner must be connected to a compatible Raymarine multifunction display (MFD), either
via Wi-Fi, or via a physical RayNet cable connection. Once connected, the multifunction display
can show Radar echo data.
Wired (RayNet) multifunction display connection
Scanner connected to a multifunction display using a RayNet cable.
Item Description
1 Quantum
the unit is shown here).
2 Connector panel of compatible Raymarine multifunction display (for clarity, only
the connections area of the unit is shown here).
3 RayNet data cable.
Wi-Fi multifunction display connection
Scanner connected to a multifunction display using Wi-Fi.
Cables and connections
™ Radome (for clarity, only the connections area of the underside of
53