Typical Systems - Raymarine Quantum 2 Installation Instructions Manual

3.6 Typical systems

Note: The following illustrations show the various products that can be connected in a typical
system. These systems are shown as an example only and may differ from your planned
installation. For information on available cables and accessories, refer to the
and accessories section.
Example: basic Radar system (wired data connection)
Item
1
2
3
4
5
6
7
Planning the installation
Description
Power supply for multifunction display.
Multifunction display.
Power supply for Radome.
Power supply for SeaTalkng ® bus (MUST be 12 V only).
Quantum ™ 2 Doppler Radome.
SeaTalkng ® bus (e.g. 5-way conector or backbone).
Evolution EV-1 / EV-2 (required for Doppler and MARPA features).
Chapter 10 Spares
25