Single Mode - Texas Instruments TI-73 Explorer Manual Book

72
Chapter 4: ConversionsàConstants
To use a constant:
1. Define the constant in the Set Constant editor (- †).
2. Recall the constant with the @ key.

Single Mode

Single Mode
By selecting
want to access one constant from the list, even if more than
one is defined.
To select the one constant (
highlight the
automatically deselects any other defined constants.
Defining Constants in Single Mode
Enter the constants in the Set Constant editor as shown in the
following example. At any time you can enter this editor and
edit, delete, or add constants.
Define
³
C
1. Enter the Set Constant
editor.
2. Highlight
cursor, if necessary.
3. Define
mode, you tell the calculator that you only
Single
next to it, and then press b. This
=
1
= + / and
2
C
1 3
- †
with the
Single
$ b
1
as + / .
2
C
1
# \
=
1 2
, , , or
C C C
1 2 3
1
= ¦ / .
2
) you want to use,
C
4