Transmitting Data Items - Texas Instruments TI-73 Explorer Manual Book

258
Chapter 13: Link and the CBLàCBR Application
To set up the TIN73 to receive data, follow these steps:
Press 9 to display the
1.
2. Select
menu.
3. Select
indicator are displayed. The receiving unit is ready to
receive transmitted items.
To exit the receive mode without receiving items, press
^, and then select
When transmission is complete, the unit is still in the
receive mode. Press - l to exit the receive mode.

Transmitting Data Items

To transmit data items from a TIN73, follow these steps:
1. Select items to send on the sending unit. Keep the
screen displayed on the sending unit (see page 257).
2. Set the receiving unit to receive mode (see page 257).
Press " on the TIN73 to display the
3.
4. Confirm that
which indicates it is set to receive.
5. Select
displayed line by line on the sending unit as the item is
queued for transmission, and then on the receiving unit as
each item is accepted.
6. After all selected items have been transmitted, the
message
and # to scroll through the names.
To stop a transmission, press ^. The
displayed on both units. To leave the error menu, select
and press " to display the
1:Link
. The message
1:Receive
1:Quit
Waiting...
. The name and type of each data item are
1:Transmit
is displayed on both calculators. Press $
Done
APPLICATIONS
Waiting...
from the
Error in Xmit
TRANSMIT
is displayed on the receiving unit,
Error in Xmit
menu.
Link RECEIVE
and the busy
menu.
SELECT
menu.
menu is
1:Quit
.