7 Trade Show Mode - Henny Penny 6.10 Service Instructions Manual

7 Trade show mode
Description Trade show mode allows appliance operation for demonstration
Prerequisite A single-phase power supply is required for operation.
Calling up the selection
Switching trade show mode
Switching off trade show
purposes.
Unit is connected to L3 and N.
See also installation instructions.
Switch unit to "I"
Tap the "Unit functions" field.
Display of Unit functions menu.
Tap the "Settings" field.
Display of PIN window.
Enter password 888 and tap the Confirm field.
Display of Trade show menu.
on
Tap the "Trade show mode is off" field.
Automatic restart of the software.
Unit is in trade show mode
The active trade show mode is indicated on the screen.
mode
Call up the Trade show mode menu.
Tap the "Trade show mode is on" field.
Automatic restart of the software.
Unit is in normal operation.
Service instructions
Trade show mode
37