Replacement Of Regulator Diode (D5802) - Panasonic SA-BT230P Service Manual

Caution: Ensure pins of the Rectifier Diode (D5702) are
properly seated before soldered onto SMPS P.C.B..
10.24. Replacement
Diode (D5802)
• Refer to "Disassembly of SMPS P.C.B.".
10.24.1. Disassembly of Regulator Diode
(D5802)
Step 1 Desolder pins of the Regulator Diode (D5802) on the
solder side of SMPS P.C.B..
of Regulator
73
Step 2 Remove 1 screw from the Regulator Diode (D5802).
Step 3 Remove the Regulator Diode (D5802) from the SMPS
P.C.B..
Caution: Avoid touching the Heatsink Unit A due to its high
temperature after prolonged use. Touching it may lead to
injuries.
Note: Refer to the diagrams of SMPS P.C.B. (Item 18.4) for
location of the electrical components.
10.24.2. Assembly
(D5802)
Step 1 Apply grease to the Heatsink Unit A.
Step 2 Mount the Regulator Diode (D5802) on to SMPS P.C.B..
Caution: Ensure pins of the Regulator Diode (D5802) are
properly seated on SMPS P.C.B..
Step 3 Fix and screw the Regulator Diode (D5802) to the Heat-
sink Unit A.
of Regulator Diode