2.1 Overview
This chapter shows how to set up the Switch for an example network.
The following lists the configuration steps for the initial setup:
•
Creating a VLAN
•
Setting Port VID
•
Power over Ethernet (PoE) Configuration
2.1.1 Creating a VLAN
VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can create a
VLAN group with fixed port members to do this.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 5 Initial Setup Network Example: VLAN
Click VLAN in the navigation panel and click the Create New VLAN button.
1
Initial Setup Example
GS1200 Series User's Guide
C
21
H A P T E R
2