Panasonic KX-TD816JT Features Manual page 13

Title
Call Forwarding (FWD)
Calling / Connected Line
Identification Presentation
(CLIP / COLP)
Charge Fee Reference
Class of Service (COS)
Conference
Console
Direct In Lines (DIL)
Do Not Disturb (DND)
Extension Group
Flexible Numbering
Handsfree Answer
Features Guide
1.2 DECT Portable Station Information for Other Features
• " " is displayed as notification while on-hook.
• The FWD/DND button can be assigned on a flexible button and
display on the bottom line of the LCD does not flash while on-
hook.
• Program [673] PS CLIP / COLP Number Assignment, is required
to assign the CLIP / COLP numbers for each PS.
• The charge fee reference allowed for a PS is determined by
program [656] PS Charge Verification Assignment.
• Program [657] PS Class of Service, is required for assigning each
PS a Class of Service (COS).
• The Conference button can be assigned on a flexible button and
display on the bottom line of the LCD does not flash while on-
hook.
• The Console cannot work with a PS.
• A PS can be assigned as the DIL 1:N destination. In this case,
program [659-660] PS DIL 1:N Extension – Day / Night, is
required.
• Intercept Routing applies to DIL 1:1. When the line is busy, the PS
is out of range or the PS power is OFF.
• " " is displayed as notification while on-hook.
• The FWD/DND button can be assigned on a flexible button and
display on the bottom line of the LCD does not flash while on-
hook.
• The PS extension group can be used with the Group Call Pickup.
• The PS extension group can be assigned in program [658] PS
Extension Group Assignment.
• In addition to current flexible numbering, the feature number for
the Super EXtra Device Port (SXDP) can be assigned. For details,
refer to the program [100] Flexible Numbering in Programming
Guide.
• This feature allows PS users to answer calls, all or intercom,
without pressing any key only when the user-supplied headset is
connected to the PS. If the PS user receives a call in this mode, a
handsfree conversation is established immediately after the user
hears beep tone and the caller hears a confirmation tone.
PS Programming, "Setting the Automatic Answer Mode", is
required to select the answering mode.
PS Condition
13