Direct Search - Radio Shack PRO-2048 Owner's Manual

20-417.fm Page 21 Wednesday, August 4, 1999 11:33 AM
6. When the scanner finds an
active frequency, you can do
one of the following:
• To store the displayed fre-
quency into the current moni-
tor memory, quickly press
.
MON
• To continue the search, press
D or —.
• To hold the frequency, press
. -H- appears.
LIMIT
Press again to cancel the
LIMIT
hold and resume
search.
Notes:
• If you press D or — during the
hold mode, the frequency
changes in the current step
increment toward the upper or
lower limit (see "Specifica-
tions" on Page 42).
• If you tune to a search skip
frequency, the display shows
LOCKOUT (see "Search Skip
Memory" on Page 22).

Direct Search

A direct search lets you specify a
starting frequency, then search for
active transmissions above or below
the specified frequency.
Note: You can also use the scan-
ner's delay feature while using direct
search (see "Using the 2-Second De-
lay" on Page 27).
Follow these steps to search for ac-
tive frequencies using
search.
1. Press
2. Using the number keys, enter
the frequency (including the dec-
the limit
imal point) you want to start the
search from, or the channel
number containing the starting
frequency.
3. Press D to search up or — to
search down starting from the
specified frequency or channel.
-d-
appear, and the next available
monitor memory flashes.
Note: If you enter an invalid fre-
quency,
peat Steps 2 and 3.
a
.
MANUAL
, , and s or t
SEARCH
appears. Re-
Error
direct
21