Viewing A World Time; Changing A World City Name - Radio Shack DX-398 Owner's Manual

• If you enter an invalid time, the
clock beeps twice and
appears for about 1 second.
Repeat Steps 3–4 to enter the
correct time.
5. Press
ENTER
set appears, and the seconds
start counting from 0.
Note: The receiver does not dis-
play the seconds.

VIEWING A WORLD TIME

Important: You need to set your local
time before following these steps. See
"Setting and Viewing the Local Time"
on Page 16.
1. Repeatedly press
until flashes.
WORLD
2. Rotate
MANUAL TUNING
name of the world city (or a city in
the same time zone) appears. The
current time in that city appears
on the display.
3. To save the displayed city as your
world city, press
stops flashing. Then, the
WORLD
world city's name disappears from
the display within 2 seconds.
4. To return to your home time,
repeatedly press
until flashes. Your home
HOME
city's name and the time in that
city appear.
5. Press
ENTER
flashing.
CHANGING A WORLD
(error)
E
CITY NAME
You can change the name of any of
the preprogrammed world cities to a
. The time you
name you choose, then save the new
name in the receiver's memory.
/
WORLD HOME
until the
.
ENTER
WORLD/HOME
. stops
HOME
1. Repeatedly press
until flashes.
HOME
2. Turn
MANUAL TUNING
city in the same time zone as the
city you want to change.
3. Press . The first character of
EDIT
the city's name flashes.
4. Turn
MANUAL TUNING
the desired character.
5. When the character you want
appears, press
TUNING
move to the next position, then
turn
MANUAL TUNING
next character (up to 8 charac-
ters).
Note: If you want to correct a
character you entered, press
to move back to it.
ING
6. Press
ENTER
stores the name of the world city
you entered.
/
WORLD HOME
to select a
to select
to
to enter the
TUN-
. The receiver
17