• Stand still. If possible, stand still until your terminal is
finished determining your location. Moving your terminal at
a walking pace while your terminal is calculating your
approximate location may substantially decrease GPS
performance.
• In a car. When using the GPS feature in a car, position
your terminal so that the GPS antenna has good access to
GPS signals. Typically, the GPS antenna has best access
to GPS signals in a car when placed near a window.
GPS Icon
When your terminal is receiving valid GPS location data, a
GPS icon will be shown in the display:
Please note, that during emergency mode, your terminal will
not display the GPS icon even when receiving GPS location
data. If valid GPS location data is available when you leave
emergency mode the GPS icon will be displayed again.
GPS Enable/Disable
1. From the main menu,
More...> Location > Interface.
The current selection (On/Off) is
highlighted.
2. Select the new choice. The display shows:
• Location Service Off
• Location Service On
Entering GPS Location Service
To enter the GPS sub-menu, press
select More...> Location:
• Position provides the actual position
information.
and select
press
Interface
On
On
Off
Select
Back
and
Location
Position
Interface
Accuracy
Select
Back
83