Log Off - Motorola MTH800 Feature User Manual

You can press
the long User ID's that are not fully displayed). Press
again to go back to the previous list.
2. Type your User PIN
When the User PIN is highlighted press
Select and type your User PIN on the next
screen then press OK.
3. Logging
From this point the request to logon is sent.
You can stop the logging process by
pressing Cancel. When the logging process
ends the display is changed to idle screen.
Colour blue of the display is when the user is in full service
mode. In other case the grey scale screen are displayed.

Log Off

You can change the state that you are logged on by pressing
> More... > RUI > Log Off from the idle screen. The
radio prompts to accept log off state or to deny it (if you
selected it by mistake).
Book On
Any radio (if the Book On is enabled by the
Service Provider) can be assigned by the
service provider to one person. You are
going to see only screen with your login and
the full service is granted from this point.
Book On Setup
anytime to view the detailed list (useful for
RUI Logon
User ID: __________
User PIN:
Edit Back
RUI Logon
Logging ...
.................Cancel
Book on as
<Jan>
Granted Assignment
period: 6 hours
.. OK
139