Muting The Audio Alert; Selecting Vg-2 Mode - Radio Shack VG-2 Guard Owner's Manual

Muting the Audio Alert

While the detector sounds a radar or safety alert signal,
you can press to temporarily silence the detector.
MUTE
When you press , the voice alert says, "mute on."
MUTE
The detector automatically resets the mute to off about
20 seconds after the radar or safety alert signal stops. Or,
you can simply press again before it resets, and
MUTE
the voice alert says, "mute off."
Note: Laser alert signals are not affected by pressing
.
MUTE

Selecting VG-2 Mode

VG-2 mode is pre-set to off. To turn on VG-2, hold down
until the voice alarm says, "VG-2 on." To turn VG-2
MUTE
off, hold down until the voice alarm says, "VG-2
MUTE
off."
17