Tutorial Mode; Starting The Tutorial Mode; Selecting The Demonstration For Each Alert - Radio Shack VG-2 Guard Owner's Manual

TUTORIAL MODE

Your detector has the tutorial mode to demonstrate all of
its alert indicators. In the tutorial mode, you can check the
status of all the indicators and the single digit display.

Starting the Tutorial Mode

To start the tutorial mode, turn on the detector while hold-
ing down
DIM
the detector sounds 3 beeps and
digit display.

Selecting the Demonstration for Each Alert

To select the demonstration for each alert, press
The detector displays each alert indicator along with its
corresponding audio alert. The detector demonstrates
the alerts in the order of 1 to 8 as shown below.
1. X-Band Alert
2. K-Band Alert
3. Ka-Band Alert
4. Laser Alert
When the demonstration finishes,
single digit display.
14
and . The tutorial mode starts when
CITY
appears on the single
t
5. Emergency Vehicle Alert
6. Road Hazard Alert
7. Rail Road Alert
8. VG-2 Alert
appears again on the
t
.
DIM