Selecting Display Brightness - Radio Shack VG-2 Guard Owner's Manual

To select the city mode, press . The voice alert says,
CITY
"city mode," and appears on the single digit display.
C
Note: If you set the display brightness to dark mode, the
single digit display shows only . To show or , set the
- C H
display brightness to bright or dim mode. (See "Selecting
Display Brightness.")
To return to the highway mode, press again. The
CITY
voice alert says, "highway mode," and H appears on the
single digit display again.

Selecting Display Brightness

You can select from three levels of brightness for your ra-
dar detector: bright, dim, and dark.
Each time you turn on the detector, the display is pre-set
to full brightness. Pressing once reduces the dis-
DIM
play's brightness by half, and the voice alert says, "dim."
When you press a second time, appears on the
-
DIM
single digit display and the voice alert says, "dark." While
the display is set to dark, X, K/Ka, VG-2, and SA indica-
tors do not light during an alert. Pressing a third time
DIM
returns the display to full brightness and the voice alarm
says, "bright."
16