Seagate NAS Pro 4-Bay Manual page 55

:Consider the points below before following the instructions
.Replace an existing or faulty hard drive with a hard drive of equal or greater capacity
.When handling hard drives, make sure that they are placed (and stored) on a cushioned surface
If you are replacing a 3.5-inch hard drive with a 2.5-inch hard drive, make certain to use the screws included
.with the NAS
Note: Seagate hard drives are optimized for use with your NAS. See Seagate NAS HDD for further

.information
inch hard drive-3.5
.Push the hard drive tray's lock button to open the latch and remove the hard drive tray .1
.Important: Make certain that you remove the correct hard drive tray

:Insert a new hard drive or replace the current hard drive .2
.Empty tray: gently bend the left side of the tray and connect the hard drive to the two pins on the right
55 4/28/15 Seagate NAS Pro 2-Bay | 4-Bay | 6-Bay