Seagate NAS Pro 4-Bay Manual page 41

.Connect the Ethernet cable to the NAS Pro and the router .1
.Connect the power cable to the NAS Pro and the outlet .2
:You can also connect
. A second Ethernet cable for redundancy or performance
Cable management: Careful management of cables is recommended for optimal operation. It

. prevents potential hazards and allows for easier maintenance
Step 2 – Power on the NAS
When first booting a diskless Seagate NAS Pro, the device must be placed into recovery mode. To enter
:recovery mode, make certain to
.Push the recovery button as instructed below
Continue to push the recovery button while applying a short push on the power button. See Operation for
41 4/28/15 Seagate NAS Pro 2-Bay | 4-Bay | 6-Bay