Usb Ports - Seagate NAS Pro 4-Bay Manual

Recovery button: The recovery button is used to perform a NAS OS Rescue (see
first configuring a diskless NAS Pro (see Setup). Use a pointed instrument to gently push the button within
.Gigabit Ethernet ports (x2): Connect the Ethernet cable from the device to your network. See
Ventilation: Keeps your NAS Pro's power supply unit cool during operation. Be sure not to block the fan .6
Connect USB direct-attached storage (DAS) devices to the Seagate NAS Pro for backups. Compatible file
formats for DAS include: FAT32, NTFS, HFS+, EXT3, EXT4, and XFS. Other storage formats will not be
Your Seagate NAS Pro also has a one-touch backup button on its front. Run the NAS OS Backup Manager to
29
.SuperSpeed USB 3.0 port: Connect a compatible USB storage device to the port .2
.Hi-Speed USB 2.0 port: Connect a compatible USB storage device to the port .3
.Power input: Plug in the AC adapter supplied with the NAS. See
.Kensington lock: Secure the NAS Pro to a desk using a compatible cable .7
.configure the one-touch button for automated backups to a compatible DAS
4/28/15
.exhaust when using the product
(Two USB 3.0 ports (front and rear
.recognized by the NAS. Capacity limitations do not apply
NAS OS Rescue) or when .1
.the cavity
Setup
Setup

USB ports

:The Seagate NAS Pro has
(One USB 2.0 port (rear
Seagate NAS Pro 2-Bay | 4-Bay | 6-Bay
.4
.5