Access The Lcd Display Menu - Seagate NAS Pro 4-Bay Manual

Hide thumbs Also See for NAS Pro 4-Bay:

Manual (69 pages)

Table Of Contents

Table of Contents

The Seagate NAS Pro 4-Bay and 6-Bay feature an LCD menu on the front of the device. It provides important

information when booting or powering off the NAS Pro. You can also check general hardware and operating

.system settings while the NAS Pro is powered on. Review the table below for further details on the LCD menu

Sub-menu

.See the IP addresses assigned to the NAS Pro

.See the percent of storage used: Globally and per volume

Up to five alerts are listed on the sub-menu. Alerts include: temperature; casing; fan; and

.disks

.Check the temperatures for the NAS Pro's: hard drives; CPU; and motherboard

.Review the fan's rotational speed

Review the date, time, and uptime. Uptime refers to the amount of time that the NAS Pro

.has been powered on. It is listed as hh:mm

.Check the version of Seagate NAS OS

Push the NAS Pro's up or down arrow to toggle through the menu selections. Each window reveals two .3

.Use the NAS Pro's up or down arrow to highlight your selection. A horizontal arrow points to the selection .4

.Apply a long push on the NAS Pro's up or down arrow to enter the sub-menu for that selection .5

.If applicable, push the NAS Pro's up or down arrow to toggle through the sub-menu selections .6

Each menu and sub-menu will remain on the LCD display for 30 seconds. To exit a menu or sub-menu, apply a

. See

System Overview

.Apply a short push on the NAS Pro's up or down arrow to turn the LCD on .1

.Apply a long push on the NAS Pro's up or down arrow to enter the main menu .2

4/28/15

for the locations of the LCD menu and the up/down arrows