Advertisement
Portavision-50 AM/FM/TV1/TV2 Portable Radio
(120-0687A)
Powering Your Radio
You can power your radio from four C batteries.
replace the batteries.
batteries such as RadioShack Cat. No. 23-551.
Follow these steps to install the batteries.
1.
Press the two latches on the battery compartment cover and pull it off
in the direction indicated by the arrows.
2.
Place four C batteries in the compartment as indicated by the polarity
symbols (+ and -) marked in the compartment.
CAUTIONS:
Use only fresh batteries of the required size and type.
Never mix fresh with old batteries, or chargeable with
non-chargeable batteries.
Never leave dead or weak batteries in the radio.
might leak chemicals that can damage your radio and corrode
electronic circuits.
for a week or more, remove and store the batteries.
3.
Replace the battery compartment cover.
Using AC Power
To power the radio with standard AC power, use the supplied power cord.
Connect one end of the cord to the radio AC jack and the other end to a
standard AC outlet.
To prevent electric shock, one blade on the AC power cord's plug is wider
than the other and the plug only fits one way.
insert the plug, turn it over and try again.
Note:
Internal batteries (if installed) automatically disconnect when you
plug the power cord into the radio.
Power
For longest operation, we recommend alkaline
If you do not plan to use the radio
Faxback Doc. # 52413
When the sound weakens,
If you cannot easily
Do not force it.
They
Advertisement
