Address Families; Authentication; Stub Routers - Cisco Nexus 3000 Series Configuration Manual

Nx-os unicast routing configuration guide, nx-os release 5.0(3)u1(1)
Hide thumbs Also See for Nexus 3000 Series:
Table of Contents

Advertisement

Chapter 4
Configuring EIGRP
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

Address Families

EIGRP supports the IPv4 address family.
Address family configuration mode includes the following EIGRP features:
You cannot configure the same feature in more than one configuration mode. For example, if you
configure the default metric in router configuration mode, you cannot configure the default metric in
address family mode.

Authentication

You can configure authentication on EIGRP messages to prevent unauthorized or invalid routing updates
in your network. EIGRP authentication supports MD5 authentication digest.
You can configure the EIGRP authentication per virtual routing and forwarding (VRF) instance or
interface using key-chain management for the authentication keys. Key-chain management allows you
to control changes to the authentication keys used by MD5 authentication digest. See the Cisco Nexus
3000 Series NX-OS Security Configuration Guide, for more details about creating key-chains.
For MD5 authentication, you configure a password that is shared at the local router and all remote
EIGRP neighbors. When an EIGRP message is created, Cisco NX-OS creates an MD5 one-way message
digest based on the message itself and the encrypted password and sends this digest along with the
EIGRP message. The receiving EIGRP neighbor validates the digest using the same encrypted password.
If the message has not changed, the calculation is identical and the EIGRP message is considered valid.
MD5 authentication also includes a sequence number with each EIGRP message that is used to ensure
that no message is replayed in the network.

Stub Routers

You can use the EIGRP stub routing feature to improve network stability, reduce resource usage, and
simplify stub router configuration. Stub routers connect to the EIGRP network through a remote router.
See the
Authentication
AS number
Default route
Metrics
Distance
Graceful restart
Logging
Load balancing
Redistribution
Router ID
Stub router
Timers
"Stub Routing" section on page
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
1-7.
Information About EIGRP
4-5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents