Clearing Bgp Information - Cisco Nexus 3000 Series Configuration Manual

Configuring Basic BGP
S e n d d o c u m e n t c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m

Clearing BGP Information

To clear BGP information, use the following commands:
Command
clear bgp all {neighbor | * | as-number |
peer-template name | prefix} [vrf vrf-name]
clear bgp all dampening [vrf vrf-name]
clear bgp all flap-statistics [vrf vrf-name]
clear bgp ip {unicast | multicast} dampening
[vrf vrf-name]
clear bgp ip {unicast | multicast} flap-statistics
[vrf vrf-name]
Cisco Nexus 3000 Series NX-OS Unicast Routing Configuration Guide, NX-OS Release 5.0(3)U1(1)
5-18
Chapter 5
Purpose
Clears one or more neighbors from all address
families. * clears all neighbors in all address
families. The arguments are as follows:
neighbor—IPv4 address of a neighbor.
•
as-number— Autonomous system number.
•
The AS number can be a 16-bit integer or a
32-bit integer in the form of higher 16-bit
decimal number and a lower 16-bit decimal
number in xx.xx format.
name—Peer template name. The name can be
•
any case-sensitive, alphanumeric string up to
64 characters.
prefix—IPv4 prefix. All neighbors within that
•
prefix are cleared.
vrf-name—VRF name. All neighbors in that
•
VRF are cleared. The name can be any
case-sensitive, alphanumeric string up to 64
characters.
Clears route flap dampening networks in all
address families. The vrf-name can be any
case-sensitive, alphanumeric string up to 64
characters.
Clears route flap statistics in all address families.
The vrf-name can be any case-sensitive,
alphanumeric string up to 64 characters.
Clears route flap dampening networks in the
selected address family. The vrf-name can be any
case-sensitive, alphanumeric string up to 64
characters.
Clears route flap statistics in the selected address
family. The vrf-name can be any case-sensitive,
alphanumeric string up to 64 characters.
Configuring Basic BGP