6235/6235i/6236i (RM-60)
Disassembly/Assembly
9. LCD Display Disassembly
A. Open the snaps (highlighted below) on both sides of the LCD frame using an
appropriate tool.
B. Gently remove frame, taking care not to damage it.
C. Gently pry the LCD shield mounting tabs to remove the shield fro the LCD frame.
10. Remove the Camera from PWB
A. Always use Camera Removal Tool to release Camera Module. Press the tabbed end into
Camera Module and release the four mounting tabs on both the top and bottom.
B. Use opposite end of tool to lift camera from its mount. Be careful not to damage any
contacts.
Note: Remember to use the orientation tab on camera housings.
Page 8
©2005 Nokia Corporation
Company Confidential
Issue 1 04/2005