JVC KD-G545 Instructions Manual page 27

Symptoms
• The elapsed playing time is not correct.
• "PLEASE" and "EJECT" appear alternately on
the display.
• The correct characters are not displayed (e.g.
album name).
• Bluetooth device does not detect the unit
• The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device.
• The unit does not make pairing with the
Bluetooth device.
• Echo or noise occurs.
• Phone sound quality is poor.
• The sound is interrupted or skipped during
playback of a Bluetooth audio player.
• The connected audio player cannot be
controlled.
* For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
Remedies/Causes
This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
Insert a playable disc into the loading slot.
This unit can only display alphabets (upper case),
numbers, and a limited number of symbols.
The unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected
device and search again.
• Search from the Bluetooth device. After the device
detects the unit, select "OPEN" on the unit to connect
the device. (See page 14.)
• Enter the same PIN code for both the unit and target
device.
• Select the device name from "SPECIAL," then try to
connect again. (See page 15.)
• Try to pair/connect from the Bluetooth device.
Adjust the microphone unit position.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to a place where you can get a better
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for "BT-PHONE."
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
player again.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
Continued on the next page
27