Using Bluetooth Devices - JVC KD-DB56 Instructions Manual

Using Bluetooth devices

Using Bluetooth devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately
purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (A Installation/
Connection Manual)
KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this
0
unit.
For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth
0
device.
Operations may be different depending on the connected device.
0
Preparation
1
Register (pair) a Bluetooth device with KS-BTA100.
Refer to the instructions manual supplied with KS-BTA100.
0
2
Change the <SRC SELECT> settings of this unit.
(Hold)
Using the Bluetooth mobile phone
KS-BTA100
Microphone
About microphone volume:
When you turn off the power of the unit, the volume level changes to Normal.
0
Using the Bluetooth audio device
B "BT AUDIO"
(CD receiver)
KS-BTA100
16 | ENGLISH
B<SRC SELECT>
B<R-AUX>
B<BT ADAPTER>
Adjusting the microphone volume
Volume level: High/ Normal (initial)/ Low
(Low) (High)
When a call comes in...
Making a call to the last connected number from
your phone.
(Press)
While talking...
Voice dialing is available only when the
connected mobile phone has the voice
recognition system.
(Hold)
Starts/pauses playback.
Receiving a call
0
Making a call
0
Switching between hands-free and phone
0
Ends/rejects call
0
Voice dialing
0
If playback does not start, operate the
0
Bluetooth audio player to start playback.
Selects track. (Press)
0
Fast-forwards or reverses the track. (Hold)
0