3. Getting acquainted with the C-900
If the song were raised three semitones, the chords would be as follows.
G#
D#
Fm
D#
G#
( iv )
G#
D#
Fm
These chords are a bit difficult to play.
In this case, you can use the transpose function to simply raise the pitch of the piano
by three semitones.
1. Press the TRANSPOSE +1 key once.
SPLIT:C4 XPOSE:+1
-----
UPPER
2. Press the TRANSPOSE +1 key two more times.
SPLIT:C4 XPOSE:+3
-----
UPPER
The pitch of the C-900 is now three semitones higher.
Now you can use the chords of figure (iii) to produce the pitches of figure (iv).
17