Reminder; Headlamp High/Low-Beam; Changer; Flash-To-Pass - Chevrolet BOLT EV 2018 Owner's Manual

152 Lighting
The instrument cluster light will
come on to indicate the
IntelliBeam system is
reactivated.
The high beams may not turn off
automatically if the system cannot
detect another vehicle's lamps
because of any of the following:
The other vehicle s lamps are
missing, damaged, obstructed
from view, or otherwise
undetected.
The other vehicle s lamps are
covered with dirt, snow, and/or
road spray.
The other vehicle s lamps cannot
be detected due to dense
exhaust, smoke, fog, snow, road
spray, mist, or other airborne
obstructions.
The vehicle's windshield is dirty,
cracked, or obstructed by
something that blocks the view
of the light sensor.
The vehicle is loaded such that
the front end points upward,
causing the light sensor to aim
high and not detect headlamps
and taillamps.
Driving on winding or hilly roads.
The IntelliBeam system may need to
be disabled if any of the above
conditions exist.
Exterior Lamps Off

Reminder

A warning chime sounds if the driver
door is opened while the vehicle is
off and the exterior lamps are on.
Headlamp High/
Low-Beam Changer
Push the turn signal lever away
from you and release, to turn the
high beams on. To return to low
beams, push the lever again or pull
it toward you and release.
This indicator light turns on in the
instrument cluster when the
high-beam headlamps are on.

Flash-to-Pass

To flash the high beams, pull the
turn signal lever toward you, and
release.

Daytime Running

Lamps (DRL)

DRL can make it easier for others to
see the front of your vehicle during
the day. Fully functional DRL are
required on all vehicles first sold in
Canada.
The DRL system comes on in
daylight when the following
conditions are met:
The power button is on.