Siemens SIMATIC PCS 7 Service Manual page 45

Basic Data
Dialog Area Note
Top left This window lists all basic pictures having a different
window product version and project version change date.
Every basic picture with a selected check box is overwritten
in the project version at the start of the OS Project Editor
with pictures from the product version.
Top right This window lists all local computer actions having a
window different product version and project version change date.
Every local computer action with a selected check box is
overwritten in the project version at the start of the OS
Project Editor with the corresponding local computer action
from the product version.
Bottom left This window lists all faceplates having a different product
window version and project version change date.
Message Filters
Parameters Meaning
Messages that The message windows have two message lists.
can be
One list shows all messages from the area for which the user has access rights for all "operator process
acknowledged in
controls". The user can acknowledge messages in this list.
a separate list
The other list shows all messages from the area for which the user has an "authorization for area" but no
access rights for "operator process controls". The user cannot acknowledge messages in this list.
The message line in the overview area only shows messages that can be acknowledged with the access
right for "operator process controls".
Messages that Both of the message pages indicated above are available to the user. Only messages from areas for
can be which the user has access rights for "operator process controls" are displayed on the message page with
acknowledged only one list and in the message line of the overview area.
on a separate
page (switch-
selectable)
Additional information
● Online help
● Online help
Software update without utilization of new functions
Service Manual, 03/2012, A5E02779792-02
WinCC Information System > Options > Options for Process Control > OS
Project Editor
OS Project Editor
Adaptations in the PCS 7 project on the ES
6.4 Adaptation of OS-relevant settings
Action
Activate the check boxes for all of the basic
pictures identified with a red "X".
Activate the check boxes for all of the basic
pictures identified with a red "X".
You can replace the faceplates available in
the project with those of the relevant product
version by transferring
the default settings.
45