Tower Mounting; Figure 9 Tower Mounting - ABB Tropos 1410 Installation Manual

Tower Mounting

You can mount the Tropos 1410 on an outdoor tower.
Note
At the antenna level, the unit must be free from metal obstruction within a 4-foot radius
Figure 9
Mount the Tropos Tropos 1410 on a tower
1. Remove the pole bracket from the mounting bracket, if they are attached.
2. Make a tower bracket by attaching the mounting bracket directly to any stainless steel or
galvanized steel pipe.
Attach the mounting bracket to the tower arm so that the top of the shield is horizontal and
3.
level.
4. Tighten the mounting bolts.
To continue installing the Tropos 1410, see
Tropos 1410 Installation Guide
Tower Mounting
4'
1 1/2'' minimum diameter pipe
Brackets not included
"Connecting Power and Data Cables"
Chapter 2
(Figure 9).
on page 28.
26