Get Started; Set Up Your M200; Choose One Option For Setup: A Compatible Mobile Device Or Computer; Option A: Set Up With A Mobile Device And Polar Flow App - Polar Electro M200 User Manual

GET STARTED

SET UP YOUR M200

Your new M200 is in storage mode and it wakes up when you plug it into a USB charger for charging or a com-
puter for setup. We recommend that you charge the battery before you start using your M200. If the battery is
completely empty, it takes a couple of minutes for the charging to start. See
on charging the battery, battery operating times and low battery notifications.

CHOOSE ONE OPTION FOR SETUP: A COMPATIBLE MOBILE DEVICE OR COMPUTER

You can choose how to set up your M200, wirelessly with a compatible mobile device or with a computer.
Both methods require an Internet connection.
Mobile setup is convenient if you don't have access to a computer with a USB port, but it might take
l
longer.
Wired computer setup is quicker and you can charge your M200 at the same time, but you need a com-
l
puter available.

OPTION A: SET UP WITH A MOBILE DEVICE AND POLAR FLOW APP

Polar M200 connects to the Polar Flow mobile app wirelessly via Bluetooth® Smart, so remember to have
Bluetooth turned on in your mobile device.
Check the Polar Flow app compatible devices at support.polar.com.
1. Detach the wristband as described in chapter Wristband.
2. To make sure there's enough charge in your M200 during the mobile setup, just plug your M200 in a
powered USB port or a USB power adapter. Make sure that the adapter is marked with "output 5Vdc"
and that it provides a minimum of 500mA. It may take a few minutes for your M200 to wake up.
Before charging, please make sure there's no moisture, hair, dust or dirt on the M200's USB con-
nector. Gently wipe off any dirt or moisture.
Batteries
9
for detailed information